Punch and Die Work (Classic Reprint)

Angebote / Angebote:

Excerpt from Punch and Die WorkA third method consists in making a shoe having the back of the slot planed at the angle mentioned, while the front wall is made square with the bottom, the die being held with setscrews, as shown in Fig. 4. If this form is used, care must be exercised when laying out the screw holes, so that they do not come in line with the screws in the bolster when the shoe is in its proper place, and, again, the screws must not press on any portion of the die immediately in line with the opening, or it will be closed somewhat when pressure is applied to the screws. Fig. 4 shows the screws pressing on the solid portion of the die.About the PublisherForgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.comThis book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully, any imperfections that remain are intentionally left to preserve the state of such historical works.