Micrometer Microscopes (Classic Reprint)

Angebote / Angebote:

Excerpt from Micrometer Microscopes We now measure: (1) The distance traveled by the spider lines as the screw under investigation is advanced five whole turns (a different number of turns may sometimes be more convenient), (2) the distance traveled during each single turn, (3) the distance traveled during each fifth (or tenth) of a turn. It is not necessary that the screw of the auxiliary microscope be very accurate, be cause all the pointings will be confined to the same portions of this screw, each only a fraction of a turn long. Besides, any irregularities here will be rendered negligible by choosing an objective that will magnify the interval to be measured sufficiently to make its image nearly fill the usable portion of the field of view. It is not necessary to use the same objective in measuring all three intervals, though it may be more convenient to do so. In obtain ing the data for deriving Table 2 a 1-inch objective was used for the five-turn intervals, and a one-half - inch objective for the other intervals. All the lengths were then expressed in terms of the same unit, namely, one-drum division of the auxiliary microscope with the one-half - inch objective. The measurement of consecutive five-turn intervals for the entire length of the screw is not necessary, but it is advisable in order to reduce the accumulation of errors by addition in determining the progressive corrections, and the extra time consumed is a small item. Again, it is hardly worth while to carry out measurements (2) and 3) with every turn. It will usually be found sufficient to measure the first and the last turn of each five-turn interval. Since adja cent turns are not likely to differ much, this grouping in pairs will check blunders. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully, any imperfections that remain are intentionally left to preserve the state of such historical works.